| Course Title |
Date |
Place |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
January 15 -
January 16 |
Orlando,
Florida |
| ISO
9000 Lead Auditor Training (ANSI-RAB Accredited) |
January 15 -
January 19 |
Dallas,
Texas |
| Hands-On
Injection Molding |
January 16 -
January 18 |
Charlotte,
North Carolina |
Foundation
Blocks for Lean Manufacturing: Introduction to
Lean
Manufacturing |
January 22 |
Dearborn,
Michigan |
| Introduction
to Quality Engineering |
January 22 -
January 26 |
Las Vegas,
Nevada |
| Foundation
Blocks for Lean Manufacturing: Visual Factory |
January 23 |
Dearborn,
Michigan |
| Heat
Treating and Hardening of Gears |
January 23 |
Nashville,
Tennessee |
| Blow
Molding |
January 23 -
January 24 |
Lowell,
Massachusetts |
| Metallurgy
of Stainless Steels |
January 23 -
January 24 |
Nashville,
Tennessee |
| Foundation
Blocks for Lean Manufacturing: Quick Changeover |
January 24 |
Dearborn,
Michigan |
Principles and
Practices of Successful Injection Molding
(two-day course) |
January 24 -
January 25 |
Charlotte,
North Carolina |
| Basic
Gear Design and Manufacturing w/TT |
January 24 -
January 25 |
Nashville,
Tennessee |
Foundation
Blocks for Lean Manufacturing: Value Stream
Mapping
and Analysis |
January 25 |
Dearborn,
Michigan |
Foundation
Blocks for Lean Manufacturing: Eliminating
Waste
through Ergonomics |
January 26 |
Dearborn,
Michigan |
| Quality
Audits for Improved Performance |
January 29 -
January 30 |
Las Vegas,
Nevada |
| Fundamentals
of Industrial Painting and Powder Coating Processes |
January 30 -
January 31 |
Orlando,
Florida |
AUDITING
AND SUPPLIER QUALITY - After the Audit:
Benefiting
From the Audit Process |
January 30 -
January 31 |
Denver,
Colorado |
Systematic
Planning of Manufacturing Cells: For Your Machining,
Assembly
and Lean Operations |
January 30 -
January 31 |
Nashville,
Tennessee |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
January 30 -
January 31 |
Chicago,
Illinois |
The Principles
and Practices of Successful Blow
Molding |
January 31 -
February 1 |
Charlotte,
North Carolina |
| The Chemistry
of Polymers for Non-Chemists |
February 5 -
February 6 |
Charlotte,
North Carolina |
| Failure
Mode Effects Analysis (FMEA) |
February 6 -
February 7 |
Milwaukee,
Wisconsin |
| Implementing
and Auditing an ISO 9000 Quality System |
February 6 -
February 8 |
Atlanta,
Georgia |
| Principles and
Practices of Successful Extrusion |
February 7 -
February 8 |
Charlotte,
North Carolina |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
February 7 -
February 8 |
Atlanta,
Georgia |
| Reliability
Engineering |
February 12 -
February 16 |
Denver,
Colorado |
| Introduction to
Polymeric Materials and Processes |
February 14 -
February 15 |
Charlotte,
North Carolina |
| 16-Hour
ISO 9000 Lead Auditor Training (ANSI-RAB Accredited) |
February 19 -
February 20 |
San Diego,
California |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
February 19 -
February 20 |
Las Vegas,
Nevada |
| Fundamentals of Industrial Hygiene |
February 19 -
February 23 |
Austin,
Texas |
| Internal
Quality Auditor Training (ANSI-RAB Accredited) |
February 21 -
February 23 |
Baltimore,
Maryland |
Material Selection
and Substitution for Thermoplastic
Applications |
February 27 |
Charlotte,
North Carolina |
| Industrial Thermoforming
Symposium and Workshop |
March 5 -
March 9 |
Dallas,
Texas |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
March 6 -
March 7 |
Dallas,
Texas |
| Design
of Experiments |
March 6 -
March 8 |
Milwaukee,
Wisconsin |
| Statistical
Process Control |
March 7 -
March 9 |
Charlotte,
North Carolina |
Principles
& Practices of Successful Extrusion (via live interactive
satellite
TV (16-hour course) It will be presented in two, 2-hour
segments every Tuesday
and Thursday for 4 weeks. |
March 12 |
Charlotte,
North Carolina |
| Introduction
to Quality Engineering |
March 12 -
March 16 |
Baltimore,
Maryland |
Preparation
for Injection Molding Certification (via live interactive
satellite
TV (16-hour course) It will be presented in two, 2-hour
segments every Tuesday
and Thursday for 4 weeks. |
March 13 |
Charlotte,
North Carolina |
| Quality
Audits for Improved Performance |
March 15 -
March 16 |
Dallas,
Texas |
| Identifying
Statistical Techniques |
March 16 |
Milwaukee,
Wisconsin |
| Adhesives
and Adhesion |
March 19 -
March 23 |
Lowell,
Massachusetts |
| ISO
9001: 2000 Customer Satisfaction Compliance |
March 21 -
March 22 |
Reno,
Nevada |
| Metrics-Measuring
Lean Performance |
March 26 |
Dearborn,
Michigan |
Comprehensive Industrial Hygiene
Review (Co-Sponsored
by The University of Michigan
and MIHS) |
March 26 -
March 30 |
Ann Arbor,
Michigan |
| ISO
9000 Lead Auditor Training (ANSI-RAB Accredited) |
March 26 -
March 30 |
Chicago,
Illinois |
| Standardized
Work and Takt Time |
March 27 |
Dearborn,
Michigan |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
March 27 -
March 28 |
Chicago,
Illinois |
| Work
Cell Design |
March 28 |
Dearborn,
Michigan |
Principles and
Practices of Successful Injection Molding
(two-day course) |
March 28 -
March 29 |
Charlotte,
North Carolina |
| Design
of Pull Systems |
March 29 |
Dearborn,
Michigan |
| Implementation
Strategies |
March 30 |
Dearborn,
Michigan |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
April 2 -
April 3 |
Orlando,
Florida |
"Hands-On" Practical
Industrial and Large Part Blow
Molding Workshop Introductory
To Advanced Concepts |
April 2 -
April 4 |
Covington,
Kentucky
(Cincinnati area) |
| ISO
14000 Lead Auditor Training (ANSI-RAB Accredited) |
April 2 -
April 6 |
San Diego,
California |
| Internal
Quality Auditor Training (ANSI-RAB Accredited) |
April 3 -
April 5 |
Milwaukee,
Wisconsin |
| Design
of Experiments II: Process Modeling & Optimization |
April 3 -
April 5 |
Milwaukee,
Wisconsin |
| Practical Design of
Experiments for Polymers Processors |
April 4 |
Charlotte,
North Carolina |
| Customer-Supplier
Partnerships |
April 5 -
April 6 |
Chicago,
Illinois |
Preparation
for Extrusion Certification (via live interactive satellite
TV (16-hour course) It will be presented in two, 2-hour
segments every
Tuesday and Thursday for 4 weeks. |
April 9 |
Charlotte,
North Carolina |
| Hands-On Injection
Molding |
April 10 -
April 12 |
Charlotte,
North Carolina |
| The Compounding
of Polymeric Materials |
April 17 -
April 19 |
Charlotte,
North Carolina |
| Principles and
Practices of Injection Molding: Advanced |
April 23 -
April 25 |
Charlotte,
North Carolina |
| Introduction
to Quality Engineering |
April 23 -
April 27 |
Charlotte,
North Carolina |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
April 24 -
April 25 |
Chicago,
Illinois |
| Implementing
and Auditing an ISO 9000 Quality System |
April 24 -
April 26 |
Baltimore,
Maryland |
| Product
Design for Die Casting |
April 25 |
Warick
Rhode Island |
| ISO
9000 Lead Auditor Training (ANSI-RAB Accredited) |
April 30 -
May 4 |
Charlotte,
North Carolina |
Principles
& Practices of Successful Injection Molding (via
live interactive
satellite TV (16-hour course) It will be presented in
two, 2-hour segments every
Tuesday and Thursday for 4 weeks. |
May 1 |
Charlotte,
North Carolina |
| Product
Design for Die Casting |
May 2 |
Charlotte,
North Carolina |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
May 2 - May 3 |
Dallas,
Texas |
| Advanced
Topics in SPC and Short-Run Applications |
May 2 - May 4 |
Dallas,
Texas |
| 16-Hour
ISO 9000 Lead Auditor Training (ANSI-RAB Accredited) |
May 5 - May 6 |
Charlotte,
North Carolina |
| Quality
Audits for Improved Performance |
May 5 - May 6 |
Charlotte,
North Carolina |
| Continuous
Steel Strip Plating Workshop (CSSP Workshop) |
May 7 - May 9 |
Toledo, Ohio |
| Product
Design for Die Casting |
May 9 |
Etobicoke
Ontario, Canada |
Material Selection
and Substitution for Thermoplastic
Applications |
May 10 |
Charlotte,
North Carolina |
| ISO
9001: 2000 Customer Satisfaction Compliance |
May 10 -
May 11 |
Charlotte,
North Carolina |
The Principles
and Practices of Successful Blow
Molding |
May 16 -
May 17 |
Charlotte,
North Carolina |
RAB-Approved
ISO 9001:2000 Transition
Training
for RAB-Certified QMS Auditors |
May 17 -
May 18 |
Las Vegas,
Nevada |
| Reliability
Engineering |
May 21 -
May 25 |
Orlando,
Florida |
| Gas-Assisted
Injection Molding |
May 22 -
May 23 |
Charlotte,
North Carolina |
From Concept to Practice: Making
Ergonomics Work
(Sponsored by the Ergonomics
Committee) |
June 3 |
New Orleans,
Louisiana |
Hardinge COBRA
Series® in Spanish
Standard Programming
/ Hands-On Operator Workshop
"Tuition-Free"
for Hardinge Customers |
June 4 - June 8 |
El Paso
Texas |
| Introduction
to Quality Engineering |
June 11 -
June 15 |
Minneapolis,
Minnesota |
Hardinge VMC SeriesII®
Vertical Machining Center in Spanish
Standard Programming
/ Hands-On Operator Workshop
"Tuition-Free"
for Hardinge Customers |
June 11 -
June 15 |
El Paso
Texas |
Principles and
Practices of Successful Injection Molding
(two-day course) |
June 13 -
June 14 |
Charlotte,
North Carolina |
Hardinge COBRA
Series® in English
Standard Programming
/ Hands-On Operator Workshop
"Tuition-Free"
for Hardinge Customers |
June 18 -
June 22 |
El Paso
Texas |
| Principles and
Practices of Successful Extrusion |
June 20 -
June 21 |
Charlotte,
North Carolina |
Partmaker®
Software Training
Standard Programming
/ Hands-On Operator Workshop
Contact the Tech
Center for tuition details |
June 25 -
June 28 |
El Paso,
Texas |
| ISO
9000 Lead Auditor Training (ANSI-RAB Accredited) |
June 25 -
June 29 |
St. Louis,
Missouri |
| Internal
Quality Auditor Training (ANSI-RAB Accredited) |
June 27 -
June 29 |
Dallas,
Texas |
| Additives
for Plastics |
July 16 - July 18 |
Lowell,
Massachusetts |
| Fundamentals of Industrial Hygiene |
July 16 - July 20 |
Cincinnati,
Ohio |
Material Selection
and Substitution for Thermoplastic
Applications |
September 6 |
Charlotte,
North Carolina |
Comprehensive Industrial Hygiene
Review (Co-Sponsored
by The University of Michigan
and MIHS) |
September 10 -
September 14 |
Ann Arbor,
Michigan |
| Principles and
Practices of Successful Extrusion |
September 17 -
September 18 |
Charlotte,
North Carolina |
| Principles and
Practices of Injection Molding: Advanced |
September 18 -
September 20 |
Charlotte,
North Carolina |
Principles
& Practices of Successful Extrusion (via live interactive
satellite TV (16-hour course) It will be presented in
two, 2-hour segments
every Tuesday and Thursday for 4 weeks. |
September 24 |
Charlotte,
North Carolina |
Preparation
for Injection Molding Certification (via live interactive
satellite TV (16-hour course) It will be presented in
two, 2-hour segments
every Tuesday and Thursday for 4 weeks. |
September 25 |
Charlotte,
North Carolina |
| Plastic Part Design
for Economical Injection Molding |
October 16 |
Cincinnati,
Ohio |
| The Chemistry
of Polymers for Non-Chemists |
October 17 -
October 18 |
Charlotte,
North Carolina |
Preparation
for Extrusion Certification (via live interactive satellite
TV (16-hour course) It will be presented in two, 2-hour
segments every
Tuesday and Thursday for 4 weeks. |
October 22 |
Charlotte,
North Carolina |
| Introduction to
Polymeric Materials and Processes |
October 24 -
October 25 |
Charlotte,
North Carolina |
| Fundamentals of Industrial Hygiene |
October 29 -
November 2 |
San Diego,
California |
Principles and
Practices of Successful Injection Molding
(two-day course) |
October 30 -
October 31 |
Charlotte,
North Carolina |
The Principles
and Practices of Successful Blow
Molding |
November 5 -
November 6 |
Charlotte,
North Carolina |
| Practical Design of
Experiments for Polymers Processors |
November 7 |
Charlotte,
North Carolina |
Principles
& Practices of Successful Injection Molding (via
live
interactive satellite TV (16-hour course) It will be
presented in two, 2-hour
segments every Tuesday and Thursday for 4 weeks. |
November 13 |
Charlotte,
North Carolina |
| Hands-On Injection
Molding |
November 28 -
November 30 |
Charlotte,
North Carolina |